Dremel 409 Thin Cut-off Wheels (36pcs)

Description

Dremel 409
Cut-off Wheels (36pcs)For cutting metal with limited use on wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.

• Use with mandrel 402
• Makes it easy to cut or slot bolts and screws
• Use on sheet metal, thin wood & plastic
• Cuts only along its edge
• 0.025″ thick, 36 per vial

User Tips

• The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
• Secure objects to a stable surface while working.
• Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
• Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
• Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.

Specifications:
Shank diameter:3,2 mm
Working diameter:24,0 mm
Max working depth:10,0 mm
Maximum RPM:35.000 1/min